DaivX CCTV(DVR Express) - DDNS registration

DVR Express internet configuration method allows remote access function straight after the registration of ID and password.

Go to network setup tab in configuration, and move to remote server configuration on the right.

1. Tick DDNS use.
2. Enter DDNS ID, password, check password, DVR location.
3. Click registration button.

4. When normal registration is completed, pop-up will display a registration completion message.
5. After the completion of registration, it is recorded in DDNS Adress tab. The user may use the DDNS Address recorded here.


The image shows that the DDNS address when the registered ID is Dvr is dvr.daivx.net.
When ID is registered, “registration ID + .daivx.net” becomes DDNS Address.

Note)
1) DDNS user registration can only be registered once per serial. The information should be entered with caution during first registration. In cases where the serial is lost, it can be found by using DDNS ID and password.

2) When DVR is connected through a router, DVR Express automatically performs port forwarding. However, routers which do not follow the standard router policy require manual port forwarding. Refer to the manual of the routers for manual port forwarding.

Only, when DVR Express is installed and activated for the first time, a message informs if port forwarding has been done automatically, or if manual port forwarding is required.